Alomejor 2pcs 5010 360KV Brushless Motor for RC Drones, Quadcopters & Multi-Axis Aircraft - High Performance Upgrade & Replacement for Smooth Aerial Maneuvers

The multicopter brushless motors are held in place with high temperature adhesives to prevent them from shifting, getting pinched or shorting out. The multi axes aircraft motor is well made and professionally manufactured. Feature: 1. STABLE PERFORMANCE: RC aircraft brushless motors have excellent shielding and permanently lubricated ball bearings to support the motor shaft. This Motors are less noise and stable. 2. SPECIALTY DESIGN: The multi axes aircraft motor is well made and professionally manufactured. The motor 5010 uses a 0.20mm inner diameter stator plate. 3. SURFACE COATING: The inner surface of the stator plate of quadcopter brushless motors is coated with epoxy resin to prevent short circuits in the windings. Specification: Item Type: Brushless Motor Material: Aluminium Alloy Housing, Copper Size: Approx. 50x10mm / 1.97x0.39in (Without Cable and Base) Shaft Diameter: Approx. 4mm/0.16in Colour: Silver KV Value: 360KV Maximum Continuous Current: 40A Maximum Continuous Power: 750W Recommended ESC: 20-40A Recommended Battery: 2-6S lipo Recommended Propeller Size: 14-16 inches Applicable: For RC Multi Axes Aircraft, Quadcopter Package List: 2 x Brushless Motor 2 x Pellet Head 16 x Screws 12 x Heat Shrink Tubing 12 x Motor Connector Note: 1. Due to manual measurement, please allow 1‑3mm/0.04‑0.12in error, thank you! 2. Due to the difference between different monitors, the picture may not reflect the actual colour of the item.

STABLE PERFORMANCE: RC aircraft brushless motors have excellent shielding and permanently lubricated ball bearings to support the motor shaft. This Motors are less noise and stable.

SPECIALTY DESIGN: The multi axes aircraft motor is well made and professionally manufactured. The motor 5010 uses a 0.20mm inner diameter stator plate.

SURFACE COATING: The inner surface of the stator plate of quadcopter brushless motors is coated with epoxy resin to prevent short circuits in the windings.

SAFE AND RELIABLE: The multicopter brushless motors are held in place with high temperature adhesives to prevent them from shifting, getting pinched or shorting out.

WIDELY USED: RC brushless motors are available with rear threaded mounting holes in 16mm/0.63in and 19mm/0.75in spacing for a wide range of applications.